Along with our neighbours, Train Trax and The Model Tree Shop, we are holding an open day on the early May Bank Holiday, Monday 4th May, between 11am and 5pm. If you have ever wondered how a laser-cutter works, wanted to see our wide range of products in person before purchasing, or wanted to meet …
Read this article (OPEN DAY – Early May Bank Holiday, Monday 4th May)
We are rapidly approaching Easter, which can only mean one thing, it’s not long to wait before the York Model Railway Show. Our stand will be in our usual spot at the bottom of the stairs on the ground floor. We will have our full range of N, TT, 00 and 0 scale architectural and …
Read this article (York Railway Show)
Bring life to your platform dioramas with these new Platform Barrows. The 0 and 00-scale kits are laser-cut from white laserable plastic; the N and TT-scale barrows are cut from brown laserboard. You can find the kits in the “Lineside Detailing” section of each scale, or using the links below: Link to N-scale Platform Barrow …
Read this article (NEW PRODUCT – Platform Barrows)
These new 00-scale roof vents are suitable to fit to any roof between 20 degrees and 45 degrees. If necessary the ends can be cut with a craft knife to change the angles for a perfect fit. The laser-cut frets are made from brown laserboard and oiled manila card so all you will need to …
Read this article (NEW PRODUCT – Roof Vents)
Our new weigh bridge is available in all scales; N, TT, 00 and 0. Laser-cut in two parts, from laserboard, with an outer frame round the weigh bridge platform. The laserboard etches beautifully to give well defined relief to the surface which can be highlighted with dry-brush techniques. Link to 0-scale Weigh Bridge Link to …
Read this article (NEW PRODUCT – Weigh Bridge)
The paper manufacturers, Winsor and Newton, have stopped producing terracotta pastel paper, which we’ve been using up to now for our range of terracotta tiles. We’ve found a replacement paper and card manufactured by Colorplan, which we will be using instead. Whilst the new Rust colour is brighter in colour it can still be “weathered” …
Read this article (NOTIFICATION: Terracotta Tiles and Ridges)
This 4mm Scale P4 Gauge model by Robin Gay was on show at York Railway Show this year. Robin has modelled the station and top yard of Wantage Tramway just as it was in 1923. He used many of our products in its construction, including these church windows and door. Link to 0-scale Church windows …
Read this article (Wantage Tramway by Robin Gay – York Railway Show)
We supplied Malcolm Briggs with laser-cut components and 3D printed columns for his canopy. He has written an article for Railway Modeller so you may have read about its construction.
Read this article (Platform Canopy)
When we view a model railway it’s usually from above, so making a good job of the building roofs can make a big difference to the overall appearance of the layout. Gary Hughes used our self adhesive slates to upgrade his card kits; I love the way he has included loose slates, and the one …
Read this article (Upgrading Card Kits)
When it was pointed out to us that plywood sleepers are no longer readily available we got straight onto it and added them to our standard range of 00 and 0 gauge products. They are available as 10″ x 8’6″ and 10″ x 9′ (5.8 x 63mm) sleepers and also in longer strips to cut …
Read this article (Plywood Sleepers)