Description
0-scale field gates
Kits to make 9 field gates. Fret of parts laser-cut from 0.9mm brown laserboard. Each gate has three layers plus additional pieces to make posts if required. The design of the gates can be varied by trimming off unwanted slats / adding additional posts.
You will need PVA / card glue to put the gates together; check the W shapes are the correct way up before attaching.
Each gate is 25.5mm high from ground to the top rail.
2 gates 84mm wide (12’ wide)
3 gates 70mm wide (10’ wide)
4 gates 56mm wide (8’ wide)





